Tungsten Carbide Wire Drawing Dies

• Customization: Available
• After-sales Service: Return and Replacement
• Type: Tungsten carbide nib
• Model NO.: Customized
• Material: Tungsten Carbide
• Shaping Mode: Forging
• Hole Type: Round Mould
• Cavity: Single-cavity
• Surface Treatment: Polish
• Application: Hardware, Household Appliances, Home Use, Commodity, Electronic, Car
• Certification: CE
• Warranty: 1 Year
• Customized: Customized
• Transport Package: in Carton
• Specification: Various
• Trademark: MJM
• Origin: China
• Production Capacity: 50000pieces/Mouth

Product Description

Excellent corrosive wear resistance.
Available in a large range of sizes.
Very cost-effective production.

Tungsten carbide Extrusion dies
Carbide Extrusion dies are pushed during extrusion process, where a slug of material through the nozzle it is a cross-sectional area (based on the shape of the extrusion die). The extrusion process can be carried out at different temperatures (especially desired for the material and the mechanical properties) and for a variety of materials including steel, copper, aluminum, nickel, lead and tin.

Round Drawing Dies:

For Drawing Various Ferrous and Nonferrous Wires, Rods, and Tubes with Diameters of 0.25mm-90.0mm

Types Available Are: Type 10, Type 11, Type 12, Type 13, Type 20, Type 21, Type 22, Type 23, Type W1, Type S11, Type S13 and Type A, Type B, Type C, Type D, Type E, Type F.

Shaped Drawing Dies:

For Drawing Various Square Flat

Rectangular and Hexagonal Ferrous and Nonferrous Materials with Size of 1.8×2.7-5.91×75mm Are Available in Types of 40. 41. 42. 60 and (L.N.R.S)

Drawing Dies for Tubes and Core Rods:

Drawing Dies for Drawing Screwed Steel Wires:

For Drawing Screwed Steel Wires of Diameter 4, 5, 6, 7, 8, etc, and different types of steel wires and tubes.

Three-Dimensional Tungsten Carbide Roll Rings

For Cold Rolling Ribbed Bars and Rollers for High Speed Rolling of Steel Wires and Bars.

They are Rollers for PFM, Finishing Roll, Reducing and Sizing Roll, Pinch Roll, Guide Roll, Inserts, Thread Roll, and Composite Roll etc.

The Main Properties for Tungsten Carbide Drawing Die Blanks

Tungsten Carbide Drawing Dies Nibs Grades and Properties:

Grades	Density	Hardness	TRS	Grain Size	Porosity
	g/cm^3	HRA	N/mm^2	um
YL10.2	14.50	92.0	2400	0.8	A02B00
YG3	15.30	90.5	1500	1.6	A04B00
YG6	14.95	90.5	1800	1.6	A04B00
YG6X	14.95	91.5	1700	1.0	A02B00
YG8	14.80	89.5	2200	1.6	A04B00
YG11	14.40	87.00	2300	1.6	A04B00
YG15	14.05	87.5	2800	1.6	A04B00
YG13X	14.30	89.5	2600	1.0	A02B00
YRL10	14.98	90.0	2800	1.2	A04B00

Our tungsten carbide drawing dies are composed by micro crystalline rare refractory metal carbide and high-purity cobalt powder for auxiliary metal or other metal powder as the binder. As a result of special production methods, and use of international advanced low pressure sintering furnace, the alloy is not only to maintain the original valued properties of tungsten carbide, and its performance increased by 1/4 than ordinary drawing die. At the same time, due to cobalt or other metal for cement, it becomes also tough.

1.Good Wear Resistance
Tungsten carbide possesses high wear resistance, which could guarantee long-term work of drawing die within any drawn amount and ensure the size and precision of products.

2.Excellent Polishing
Carbide has a good polishing, which can be processed like mirror, thus ensuring high-quality of metal surface.

3.Small Adhesion
In the drawing process, the drawing die keep little adhesion with metal processed, thereby enhancing the durability of drawing die, and make processing material to acquire high-quality gloss finish for surface.

4.Small Friction Coefficient
In the drawing process, small frictional resistance can greatly reduce the power loss, thus enhancing efficiency.

5.High Coefficient of Thermal Conductivity
In the drawing process, heat can be conducted away very well.

6.Good Corrosion Resistance
The property is in the wet lubricated stretch, especially in the acidic lubricated stretch, to become more superior.